An improved analytical approach for simulating the lateral kinematic distress of deepwater offshore pipelines     

《Applied Ocean Research》2019

Offshore pipelines are critical infrastructures and any possible damage may have devastating financial and environmental consequences. Earthquake-related geohazards (such as strong ground motion, active seismic faults, submarine landslides and debris flows) consist crucial threats that an offshore pipeline has to overcome. The main aim of the current study is to examine analytically a seabed-laid offshore pipeline subjected to a lateral kinematic distress due to a submarine landslide or a debris flow. Extra emphasis is given on the impact of pipe-soil interaction on the pipe response, by the realistic representation of the soil resistance via a tri-linear model. Firstly, the proposed analytical model is validated with a numerical model utilizing the finite-element method. Subsequently, various combinations of soil parameters and loading conditions that affect the examined problem are investigated with realistic input data taken from the offshore section of the high-pressure natural-gas pipeline TAP (Trans Adriatic Pipeline) in the Adriatic Sea. Finally, useful conclusions are drawn regarding the applicability and the efficiency of the proposed approach.  相似文献   

A multiscale work-analysis approach for geotechnical structures     

Hao Xiong  Zhen-Yu Yin  François Nicot 《国际地质力学数值与分析法杂志》2019,43(6):1230-1250

This paper presents a second-order work analysis in application to geotechnical problems by using a novel effective multiscale approach. To abandon complicated equations involved in conventional phenomenological models, this multiscale approach employs a micromechanically-based formulation, in which only four parameters are involved. The multiscale approach makes it possible a coupling of the finite element method (FEM) and the micromechanically-based model. The FEM is used to solve the boundary value problem (BVP) while the micromechanically-based model is utilized at the Gauss point of the FEM. Then, the multiscale approach is used to simulate a three-dimensional triaxial test and a plain-strain footing. On the basis of the simulations, material instabilities are analyzed at both mesoscale and global scale. The second-order work criterion is then used to analyze the numerical results. It opens a road to interpret and understand the micromechanisms hiding behind the occurrence of failure in geotechnical issues.  相似文献   

Plane of elastic non-resisting tension material under foundation structures     

A. Baratta  I. Corbi 《国际地质力学数值与分析法杂志》2004,28(6):531-542

In the frame of 2D-static problems one approaches the problem of elastic-NRT (not-resisting tension) semi-plane loaded on its limit line. This problem is intended to model the stress situation induced in the soil by a foundation structure. The solution, in terms of activated stress field, is searched for in the class of stress fields satisfying equilibrium and admissibility conditions, by applying an energy approach. Copyright © 2004 John Wiley & Sons, Ltd.  相似文献   

显性语法知识传授中的发现原则     

PatMoore 《成都信息工程学院学报》2002,17(4):289-299

尽管语法在交际教学法鼎盛时期一度遭到冷遇，但现在又重新被英语语言教学所接纳，作为一种新的语法教学方式，发现原则综合了传统归纳发和演绎法的长处，概述了发现原则的理论依据，指出发现原则旨在鼓励学习者积极参与而非被动接受，符合当前认知主义对二语学习的认识。  相似文献   

无规取向、无吸收非球形粒子光散射的T-矩阵方法     

丁继烈  许丽生 《成都信息工程学院学报》2001,16(3):159-168

较详细地研究了无规取向、无吸收椭球体粒子的T－矩阵收敛问题。首先，简要概括了nmax的3种收敛方案和它们的基本特性。然后，应用1993年提出的数学收敛方法（M－方法）和1998年提出和物理收敛方法（P－方法）研究收敛问题。结果表明椭球粒子收敛精度对粒子的尺度参数，纵横比以及椭球体的种类（例如，长／扁椭球）有很强的依赖性。当粒子的尺度参数不太大时，甚至在极端纵横比的条件下，P－收敛方案优于M－收敛方案。  相似文献   

关于非球形粒子光散射的T-矩阵数值计算方法的研究   总被引：1，自引：0，他引：1  

丁继烈  许丽生  张强 《成都信息工程学院学报》2001,16(1):1-7

首先介绍了无规取向轴对称非球形粒子光散射的T－矩阵数值方法。然后，进一步研究了T－矩阵计算的收敛问题，提出了一种新的关于无规取向无吸收非线形散射物体的物理收敛方法，我们研究了椭球粒子的收敛问题，结果表明我们的数值方法和T－矩阵计算程序是有效的， 收敛精度与粒子的尺度和形状有很强的依赖性，在一定的条件下，我们的物理收敛速度优于NASA Mishchenko的数学收敛速序。  相似文献   

用层次分析法决策地下水库回灌方案的排序问题     

李云峰  王文科  李志刚  王希宁 《地球科学与环境学报》1992,(2)

本文引用了一种新的系统分析方法(层次分析法)对地下水库人工回灌的复杂系统进行了择优排序研究,取得了满意的结果。实践证明,层次分析法对于地下水库人工回灌方案的择优是一种简捷实用的决策方法。  相似文献   

Usefulness of geological,mineralogical, chemical and chemometric analytical techniques in exploitation and profitability studies of iron mines and their associated elements     

M. Dolores Petit-Dominguez  M. Isabel Rucandio  Almudena Galan-Saulnier  Rosario Garcia-Gimenez 《Journal of Geochemical Exploration》2008

Due to the high number of variables involved in mine profitability studies, it is often very difficult to establish connections among them in order to provide a blend of market saleable quality products. In this sense, analytical chemistry together with chemometry are essential and indispensable disciplines to tackle these studies. The aim of this work was to demonstrate the utility of these disciplines to carry out optimization studies of iron mines. For this purpose, one of the most important iron mines of the Iberian Peninsula was chosen, sited in the mountain range of Sierra Menera, near the location of Ojos Negros (Teruel, Spain). Geological, mineralogical and chemical composition of 148 samples was analyzed, corresponding to different depths of three drill holes (named TE1, TE2 and TE3). In particular, aspects concerning to chemical composition are very important, since the mean contents of certain elements, such as phosphorus, sodium and potassium, should be restricted to the established limits to prevent that companies can drive back the raw material if they do not fulfil the necessary requirements. On the other hand, the large number of analysed samples drove us to use a statistical processing of the data. Among other aspects, it provides a way to find possible connections among a high number of variables and classify samples into compositional groups sharing similar composition, in order to limit the mineralised area and to obtain enough information about the amount of those chemical elements associated to iron ores. Data obtained from all these analytical techniques were in good agreement and provide a methodology that can be of wide interest applied to different geological studies.  相似文献   

Internal generation of waves: Delta source function method and source term addition method     

Gunwoo Kim  Changhoon Lee  Kyung-Duck Suh   《Ocean Engineering》2007,34(17-18):2251-2264

In this study, we investigate two internal wave generation methods in numerical modeling of time-dependent equations for water wave propagation, i.e., delta source function method and source term addition method, the latter of which has been called the line source method in literatures. We derive delta source functions for the Boussinesq-type equations and extended mild-slope equations. By applying the fractional step splitting method, we show that the delta source function method is equivalent to the source term addition method employing the energy velocity. This suggests that the energy velocity should be used rather than the phase velocity for the transport of incident wave energy in the source term addition method. Finally, the performance of the delta source function method is verified by accurately generating nonlinear cnoidal waves as well as linear waves for horizontally one-dimensional cases.  相似文献   

Freely floating-body simulation by a 2D fully nonlinear numerical wave tank     

Weoncheol Koo  Moo-Hyun Kim 《Ocean Engineering》2004,31(16):221-2046

Nonlinear interactions between large waves and freely floating bodies are investigated by a 2D fully nonlinear numerical wave tank (NWT). The fully nonlinear 2D NWT is developed based on the potential theory, MEL/material-node time-marching approach, and boundary element method (BEM). A robust and stable 4th-order Runge–Kutta fully updated time-integration scheme is used with regriding (every time step) and smoothing (every five steps). A special φ_n-η type numerical beach on the free surface is developed to minimize wave reflection from end-wall and wave maker. The acceleration-potential formulation and direct mode-decomposition method are used for calculating the time derivative of velocity potential. The indirect mode-decomposition method is also independently developed for cross-checking. The present fully nonlinear simulations for a 2D freely floating barge are compared with the corresponding linear results, Nojiri and Murayama’s (Trans. West-Jpn. Soc. Nav. Archit. 51 (1975)) experimental results, and Tanizawa and Minami’s (Abstract for the 6th Symposium on Nonlinear and Free-surface Flow, 1998) fully nonlinear simulation results. It is shown that the fully nonlinear results converge to the corresponding linear results as incident wave heights decrease. A noticeable discrepancy between linear and fully nonlinear simulations is observed near the resonance area, where the second and third harmonic sway forces are even bigger than the first harmonic component causing highly nonlinear features in sway time series. The surprisingly large second harmonic heave forces in short waves are also successfully reproduced. The fully updated time-marching scheme is found to be much more robust than the frozen-coefficient method in fully nonlinear simulations with floating bodies. To compare the role of free-surface and body-surface nonlinearities, the body-nonlinear-only case with linearized free-surface condition was separately developed and simulated.  相似文献